Function：
*Built-in 300MAH 4.2V lithium battery, rechargeable.
*TFT 1.8-inch color screen display, graphical display of various parameters
*Automatically detects NPN and PNP transistors, N-channel and P-channel MOSFETs, IGBTs, diodes (including double diodes), thyristors, transistors, resistors and capacitors.
*Automatically detects the pinouts of components and graphically displays them on a color screen.
* Can detect infrared code (support NEC format infrared remote control)
*Transistors, MOSFET protection diodes, can be detected amplification coefficient and the base of the determination of the forward bias voltage of the emitter transistor
*Depletion type and enhancement type MOSFETs can be distinguished.
*MOSFETs with gate threshold voltage and gate capacitance can be measured.
*Supports measurement and symbol display of two resistors with a resolution of 0.1 Ohm and a maximum measurement value of 50M Ohm.
*VOSS and ESR can be displayed for capacitors higher than 10UF.
*Measures inductance for resistances below 2100 ohms and DC resistance for inductances below 10UH.
*Higher test speed, expiration date component test: in 2 seconds (except in the larger capacitors, large capacitance measurement also need a longer time)
* Equipped with a calibration needle, calibrated to test small resistors more accurately
*One button operation, power on test
*Power consumption off mode: less than 20 nA
*Automatic shutdown function, saving battery energy, improve the duration.
Product Accessories:
Tester main unit X1
Test cable X3
USB cable X1
Features:
It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery
It also can detect zener diode and has the function of self-calibration.
After detection, the infrared remote control with the “IR” light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too.
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.
Not like the usual black and white display, this detector will show results in color.
Specifications:
Power Mode: Rechargeable Lithium Battery
Display: 3.5 * 3cm TFT Screen
Diode Range: < 4.5V
Zener Diode:Transistor Detect Area: 0.01-4.5V Zener Diode Detect Area: 0.01-30V
Triac Range: IGT < 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50MΩ
Inductance: 0.01mH-20H
Battery: 0.1-4.5V
Item Size: 8.8 * 8 * 2.8cm / 3.47 * 3.15 * 1.10in
Item Weight: 111.5g / 3.94oz
Package Size: 14.5 * 12 * 2.7cm / 5.71 * 4.73 * 1.06in
Package Weight: 114g / 4.02oz
Package List:
1 * Transistor Tester
1 * Electronic Component Set(Send Randomly)
3 * Test Hook(Send Randomly)
Features:
*Brand new and high quality.
*Added startup voltage detection function.
*for -click , power-on test, for -click finish.
*Automatic shutdown function, can avoid unnecessary waste, save battery energy, improve battery life.
*The power supply is 9v stacked battery. If it is powered for a long time, two lithium batteries can be used to form an 8.v battery pack.
*The LCD is 12864 LCD display with backlight, and the backlight color is generally yellow-green.
*LC-T4 graphic multi-function tester: resistance + capacitor + diode + thyristor + inductance + transistor + mos tube.
Specifications:
Material :PCB
Power mode :6F22
Display :128 x 64 LCD backlight
Current test available: 6mA
Product size :7.2 * 6.25cm (L * W)
Test speed :2 seconds (normal 1 minute for large capacitors)
Shutdown current: 20nA
Display value :25pf-100mF(resolution 1pF)
Inductance: 0.01mH-20H
Power supply voltage :9V layer built-in battery /2 lithium-ion batteries, forming an 8.4V battery pack
Resistance resolution: 0.1 ohms
High measurement value: 50M ohms
Package Content:
1 x ESR instrument transistor tester
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Reviews
There are no reviews yet.