100W Power Station Specification:
Rated power: 100W
Output waveform: correction wave
AC output voltage: 220V ±15%
AC output frequency: 50Hz/60Hz ±2Hz
Conversion efficiency: maximum value>90%
Charging interface: external charger interface and solar panel charging interface DC5521*1 (built-in solar intelligent controller)
AC output socket: universal seat
DC output voltage: DC5V 2.4A, 2*USB; DC12V3A, 2*DC5521
LED light: The LED light is high on, the LED light is half on, the LED light flashes, and the LED light is turned off in 4 states
Product Size W*D*H(mm) :160*100*143
Net weight: 1kg
LiFePO4 battery:
3000+ cycles : approximately equal to 10 years of full capacity use
Safety: Short circuit is not easy to cause fire and explosion
Durability: Long battery life
High temperature resistance: the peak electric heating reaches 350-500°C
Environmental protection: generally considered to be free of heavy metals and less polluted than rare metals
3 charging methods: indoor and outdoor flexible energy replenishment, main charging, car charging, solar charging
Solar panel specifications:
Material: Monocrystalline silicon solar panels
Solar panel voltage: DC12-18V
Power: 15W
Cable interface: DC 5521
Cable length: 3m
Size: 350*350*17mm
Weight: 1.4KG














【Frequently Asked Questions】
Q1: What devices can the 100W power stations supply?
A: 100W power stations can charge/power devices with power ratings below 100W. The total power consumption of all connected devices must also remain below 100W. If power demand exceeds these limits, the power station will enter protection mode and automatically shut down. Always verify device specifications before purchase.
Q2: How do I calculate device runtime?
A: Use this formula: Runtime = 76.8Wh ÷ Actual Device Power Consumption. For example, a device consuming 30W will run approximately 2.56 hours. Note that actual power consumption may vary depending on usage scenarios.
Q3: How long does it take to fully charge the power station?
Approximately 5 hours via AC power outlet. Approximately 6 hours using a 20W solar panel (sold separately).
Q4: Does the power station support UPS?
A: Yes, the power station is equipped with a UPS system to provide uninterrupted power supply to critical equipment, purify power quality, and ensure the safety of control systems.
Q5: Can the power station charge while in use?
A: Yes, you can use it to power other devices while simultaneously charging the power station itself.














Reviews
There are no reviews yet.