3M4M Car Battery Jumper Cable Boost Cable Line Emergency Jumper Starter Lead Extended And Thickened Double

Attention: This is a thicker and longer extension, not a thinner one, it is safer and more reliable.

[Product Name]: 930 Firewire

[Product Packaging]: Bag

[Product Color]: Black+Red

[Product Size]: Approximately 3-4M

Material : PVC+copper

Don’t worry when your car can’t start because it’s out of battery. Take a taxi from the roadside and easily pick it up at both ends. Cars rarely run out of battery, but occasionally running out of battery can be really frustrating Not afraid of ten thousand, just in case, it’s better to bring a battery clip There are no worries about the future

The connected program is as follows:

(1) Firstly, clamp the red wire of the starting line onto the positive pole of the red battery of the “rescued vehicle”.

(2) Then clamp the red wire on the other end onto the positive pole of the red battery of the “rescue vehicle”.

(3) Clamp the black wire onto the black negative battery of the “rescued vehicle”.

(4) Then clamp the black wire onto the black negative battery of the rescue vehicle.

(5) Start the engine of the “rescue vehicle” first, and then start the engine of the “rescued vehicle”. If the rescued vehicle still cannot be started, please check if the metal contact parts have poor contact.

After starting the engine, it is still necessary to remove the ignition wires in order, otherwise it may cause a short circuit.

The procedure for dismantling the line is as follows:

First, remove the black wire of the ‘rescued car’.

(2) Remove the black wires of the ‘rescue vehicle’ again.

(3) Then remove the red wire of the “rescue vehicle”.

(4) Finally, remove the red wire of the ‘rescued vehicle’.

usage method:

Battery wires can be purchased in the auto parts market. Battery wires are usually black and red, mainly used to distinguish between positive and negative electrodes. When riding, the vehicle with electricity on the other side does not need to be started. Simply connect the batteries of both vehicles in parallel, with the red wire connected to the positive pole of the two batteries and the black wire connected to the negative pole of the two batteries. After that, you can start the vehicle.