BUVAYE Portable Car Jump Starter Power Bank With 2000A Peak Car Battery Starter 150PSI Air pum Booster

● 1-year warranty service (If there is a problem with the product, such as battery damage, product does not work, etc., we provide 1-year warranty service, you can contact us)

● Logistics support (if you have not received the goods for a long time, or the goods are damaged, please do not raise disputes, you can contact our staff directly, we will resend one for you, and provide you with favorable policies)

● Return Policy (within 1 month of receiving the goods, if you need to return the goods for a refund, you can contact our staff)

1.Lap function

The built-in 8,000/10,000 mAh high-rated lithium polymer battery can provide a peak current of 2,000A and support starting 12V cars with a displacement up to 7.0L Giesel and 5.0L Diesel engine. With fully charged, it can start the car for more than 20 times! PC/ABS material shell make it strong and resistant to use even in -20℃- 60℃ extreme weather!

10 INTELLIGENTSAFETY PROTECTIONEnsure Security For Every Starting

• Reverse Polarity，Over Current，Over Charge，Over Discharge，Short Circuit，Over Voltage，Overload，Spark Proof

2.Inflation function

Portable air compressor has a maximum pressure of 150 PSI with an air flow of 20L/min! Only 4 minutes can fully inflate a car tire (0-36PSI)。The product can detect tire pressure in real time, automatically stop inflating when full of air, and has four inflating modes

1）Car Tyre(2.0-2.5Bar)—-1.22min

2）Bike Tyre(0-36PSI)—-52sec

3）Bike Tyre (0-40PSI)—-22sec

4）Ball (0-14PSI)—-10sec

3.Lighting function

The product equipped with 3 Colors LED lighting，which are useful in roadside emergencies at night.

1）Flashlight

2）Strobe

3）SOS

4.Power bank function

Works as a 5V/2A USB-A output power bank, meets your multiple emergent charging need for 1）mobile phones,

2）earphones,

3）tablets

4）watches

5.Instructions for use

4 Steps to Jump Start （If in doubt, see the picture below）

1）After the product is started, insert the smart clip into the EC5 interface

2）the red clip clips the positive electrode, the black clip clips the negative electrode

3）get on the car and try to start the car

4 Steps to Inflate（If in doubt, see the picture below）

1) Install the inflation hose

2) Clamp the tire nozzle

3) Long press the product power button

4) Short press the mode button, you can choose to increase or decrease the air pressure until the tire is inflated

6.Included product

1. TS03 Jump Starter & Air Pump
2. Multi-Languages Instruction
3. Type-C Charging Cable
4. Nozzle Adapters
5. Jumper Cable
6. Storage Bag
7. Air Hose

7.Matters needing attention

(1) Please make sure the product power is over 75%, which can achieve the best starting performance; As the power decreases, the starting performance will also decline.

(2) The process of pump pressurization working will generate heat, DO NOT inflate continuously for more than 10 minutes to avoid overworking, please allow a 5-8 minutes cooling.

(3) For the sake of safety, DO NOT directly exposed the product to the sunlight for a long time or used it in the humid condition, which may demage the mainboard and cuase short circuit.

8.Brand introduction

BUVAYE is a professional brand of automotive electronics. The main products are automobile emergency start power supply, car inflator pump, car charger and so on. Our business covers more than 100 countries and regions and has been recognized and praised by consumers around the world. Our philosophy is “Drive safely, travel with confidence”. Therefore, we are committed to designing and manufacturing high-quality, premium products to solve the various difficulties and inconveniences people encounter during the driving process. In the future, we will continue to introduce more categories of products to meet the different needs of customers.